Hyde SKID PLATE Installation Instructions

DO NOT USE LOCTITE®

Secure bike in a safe manner...cold motor with fuel shut off.

1. Start with the front bracket: use threaded installation tool to loosely hold the bracket in place.
2. Thread a bolt into the opposite side, slightly snug.
3. Remove the installation tool and insert the second front bracket bolt.
4. Tighten both bolts only enough to hold plate in place.
5. Insert the rear mount bolts.
6. Once all bolts are in place, tighten evenly.

DO NOT use Loctite® on our brackets.

TIP: Once you have determined where the front mount will ride, use a dab of silicone sealer to adhere mount to the frame making it stationary upon removal of plate.